Tungsten Carbide Tipped (TCT) Annular Cutters have become a successful range of Annular Cutters worldwide. BDS is contributing to this growing demand by expanding the range with cutting depths of 30 mm, 55 mm, 75 mm and 110 mm length and almost continuous gradation from ø 12 mm to ø 150 mm. These core drills on request are also available in Universal Shank. Use coupon code WELCOMEGST at checkout and get 25% Discount on all Annular Cutters.

Carbide (TCT)
Core Drills Short

> 30 mm Cutting depth
> 19 mm Weldon shank (3/4“) up to 60 mm diameter and 32 mm Weldon (1 1/4”) above 61 mm diameter.

TCT-Standard-core drills
Diameter in mmOrder no.PriceQtyprice_hsort
2,662.00  + 18% GST
2662
2,662.00  + 18% GST
2662
2,662.00  + 18% GST
2662
2,662.00  + 18% GST
2662
2,662.00  + 18% GST
2662
2,662.00  + 18% GST
2662
2,662.00  + 18% GST
2662
2,662.00  + 18% GST
2662
2,662.00  + 18% GST
2662
2,662.00  + 18% GST
2662
2,662.00  + 18% GST
2662
2,662.00  + 18% GST
2662
2,662.00  + 18% GST
2662
2,662.00  + 18% GST
2662
2,932.00  + 18% GST
2932
2,932.00  + 18% GST
2932
2,932.00  + 18% GST
2932
2,932.00  + 18% GST
2932
2,932.00  + 18% GST
2932
3,430.00  + 18% GST
3430
3,430.00  + 18% GST
3430
3,430.00  + 18% GST
3430
3,430.00  + 18% GST
3430
3,430.00  + 18% GST
3430
3,905.00  + 18% GST
3905
3,905.00  + 18% GST
3905
3,905.00  + 18% GST
3905
3,905.00  + 18% GST
3905
3,905.00  + 18% GST
3905
4,685.00  + 18% GST
4685
4,685.00  + 18% GST
4685
4,685.00  + 18% GST
4685
4,685.00  + 18% GST
4685
4,685.00  + 18% GST
4685
5,366.00  + 18% GST
5366
5,366.00  + 18% GST
5366
5,366.00  + 18% GST
5366
5,366.00  + 18% GST
5366
5,366.00  + 18% GST
5366
6,271.00  + 18% GST
6271
6,271.00  + 18% GST
6271
6,271.00  + 18% GST
6271
6,271.00  + 18% GST
6271
6,271.00  + 18% GST
6271
6,925.00  + 18% GST
6925
6,925.00  + 18% GST
6925
6,925.00  + 18% GST
6925
6,925.00  + 18% GST
6925
6,925.00  + 18% GST
6925
8,022.00  + 18% GST
8022
8,022.00  + 18% GST
8022
8,022.00  + 18% GST
8022
8,022.00  + 18% GST
8022
8,022.00  + 18% GST
8022
9,096.00  + 18% GST
9096
9,096.00  + 18% GST
9096
9,096.00  + 18% GST
9096
9,096.00  + 18% GST
9096
9,096.00  + 18% GST
9096
10,321.00  + 18% GST
10321
10,321.00  + 18% GST
10321
10,321.00  + 18% GST
10321
10,321.00  + 18% GST
10321
10,321.00  + 18% GST
10321
11,375.00  + 18% GST
11375
11,375.00  + 18% GST
11375
11,375.00  + 18% GST
11375
11,375.00  + 18% GST
11375
11,375.00  + 18% GST
11375
13,165.00  + 18% GST
13165
13,165.00  + 18% GST
13165
13,165.00  + 18% GST
13165
13,165.00  + 18% GST
13165
13,165.00  + 18% GST
13165
14,054.00  + 18% GST
14054
14,054.00  + 18% GST
14054
14,054.00  + 18% GST
14054
14,054.00  + 18% GST
14054
14,054.00  + 18% GST
14054
15,412.00  + 18% GST
15412
15,412.00  + 18% GST
15412
15,412.00  + 18% GST
15412
15,412.00  + 18% GST
15412
15,412.00  + 18% GST
15412
17,661.00  + 18% GST
17661
17,661.00  + 18% GST
17661
17,661.00  + 18% GST
17661
17,661.00  + 18% GST
17661
17,661.00  + 18% GST
17661
26,560.00  + 18% GST
26560
27,944.00  + 18% GST
27944
28,597.00  + 18% GST
28597
32,094.00  + 18% GST
32094
33,754.00  + 18% GST
33754
37,905.00  + 18% GST
37905
41,777.00  + 18% GST
41777
44,821.00  + 18% GST
44821
48,917.00  + 18% GST
48917
53,121.00  + 18% GST
53121
Sale annular cutter coolant

Coolant – 1 Liter (Water Soluble 1:9)

For TCT Annular Cutters

No Reviews

The BDS Coolant should be used in 1:10 proportion. So 1 liter of the bottle makes 10 liters of coolant. It is very important to use Coolant while drilling with TCT annular cutters. TCT annular cutters have carbide tips, the carbide tips are very strong and actually do not need any lubrication for cutting but, the carbide tips are brazed as tips of annular cutter, this brazing need to remain cool. If the brazing gets hot the chances of carbide tips coming out of brazing are high. For this reason, the operators should use coolants for TCT annular cutters and not lubricants. The use of BDS coolants on any brand of TCT annular cutter can increase the life of cutter to 30 – 50%.

in stock
1,775.00  1,686.00  + 18% GST Add to cart
Sale

PowerCLEANER Chips Removing & Cleaning Tool

Chips Removing & Cleaning Tool

No Reviews

PowerCLEANER is a new innovative Chips Removing & Cleaning Tool from BDS. It has a hook which helps the operator remove the revolved metal chips around annular cutters to drill bits, then the special brush is used to move or clean the chips from the workplace and collect in a dustbin. When this tool the operator does not anymore requires Allen key/screwdriver to remove chips from annular cutter and does not require a paintbrush for cleaning chips. The metal chips are very hot and can burn the fingers, using powerCLEANER helöps increase the safety of the operator and keep the work area clean.

50in stock
1,688.00  1,500.00  + 18% GST Add to cart
ZAK 075 Ejector pin

ZAK 075 Ejector Pin

For 12 to 60 mm diameter cutters of 30 mm length

No Reviews

ZAK 075 Ejector Pin for 12 to 60 mm diameter cutters of 30 mm length

in stock
330.00  + 18% GST Add to cart
Ejector pin

ZAK 090 Ejector Pin

For 61 to 150 mm diameter cutters of 30 mm length

No Reviews

ZAK 090 Ejector Pin For 61 to 150 mm diameter cutters of 30 mm length

in stock
930.00  + 18% GST Add to cart

Carbide (TCT)
Core Drills Long

> 55 mm Cutting depth
> 19 mm Weldon shank (3/4“) up to 60 mm diameter and 32 mm Weldon (1 1/4”) above 61 mm diameter.

TCT-Standard- core drills
Diameter in mmOrder no.PriceQuantityQtyprice_hsort
3,161.00  + 18% GST
3161
3,162.00  + 18% GST
3162
3,162.00  + 18% GST
3162
3,162.00  + 18% GST
3162
3,162.00  + 18% GST
3162
3,162.00  + 18% GST
3162
3,162.00  + 18% GST
3162
3,162.00  + 18% GST
3162
3,162.00  + 18% GST
3162
3,162.00  + 18% GST
3162
3,162.00  + 18% GST
3162
3,162.00  + 18% GST
3162
3,162.00  + 18% GST
3162
3,162.00  + 18% GST
3162
3,443.00  + 18% GST
3443
3,443.00  + 18% GST
3443
3,443.00  + 18% GST
3443
3,443.00  + 18% GST
3443
3,443.00  + 18% GST
3443
4,141.00  + 18% GST
4141
4,141.00  + 18% GST
4141
4,141.00  + 18% GST
4141
4,141.00  + 18% GST
4141
4,141.00  + 18% GST
4141
4,740.00  + 18% GST
4740
4,740.00  + 18% GST
4740
4,740.00  + 18% GST
4740
4,740.00  + 18% GST
4740
4,740.00  + 18% GST
4740
5,654.00  + 18% GST
5654
5,654.00  + 18% GST
5654
5,654.00  + 18% GST
5654
5,654.00  + 18% GST
5654
5,654.00  + 18% GST
5654
6,510.00  + 18% GST
6510
6,510.00  + 18% GST
6510
6,510.00  + 18% GST
6510
6,510.00  + 18% GST
6510
6,510.00  + 18% GST
6510
7,676.00  + 18% GST
7676
7,676.00  + 18% GST
7676
7,676.00  + 18% GST
7676
7,676.00  + 18% GST
7676
7,676.00  + 18% GST
7676
8,463.00  + 18% GST
8463
8,463.00  + 18% GST
8463
8,463.00  + 18% GST
8463
8,463.00  + 18% GST
8463
8,463.00  + 18% GST
8463
9,801.00  + 18% GST
9801
9,801.00  + 18% GST
9801
9,801.00  + 18% GST
9801
9,801.00  + 18% GST
9801
9,801.00  + 18% GST
9801
11,230.00  + 18% GST
11230
11,230.00  + 18% GST
11230
11,230.00  + 18% GST
11230
11,230.00  + 18% GST
11230
11,230.00  + 18% GST
11230
12,595.00  + 18% GST
12595
12,595.00  + 18% GST
12595
12,595.00  + 18% GST
12595
12,595.00  + 18% GST
12595
12,595.00  + 18% GST
12595
13,865.00  + 18% GST
13865
13,865.00  + 18% GST
13865
13,865.00  + 18% GST
13865
13,865.00  + 18% GST
13865
13,865.00  + 18% GST
13865
16,062.00  + 18% GST
16062
16,062.00  + 18% GST
16062
16,062.00  + 18% GST
16062
16,062.00  + 18% GST
16062
16,062.00  + 18% GST
16062
17,103.00  + 18% GST
17103
17,103.00  + 18% GST
17103
17,103.00  + 18% GST
17103
17,103.00  + 18% GST
17103
17,103.00  + 18% GST
17103
18,747.00  + 18% GST
18747
18,747.00  + 18% GST
18747
18,747.00  + 18% GST
18747
18,747.00  + 18% GST
18747
18,747.00  + 18% GST
18747
21,502.00  + 18% GST
21502
21,502.00  + 18% GST
21502
21,502.00  + 18% GST
21502
21,502.00  + 18% GST
21502
21,502.00  + 18% GST
21502
Sale annular cutter coolant

Coolant – 1 Liter (Water Soluble 1:9)

For TCT Annular Cutters

No Reviews

The BDS Coolant should be used in 1:10 proportion. So 1 liter of the bottle makes 10 liters of coolant. It is very important to use Coolant while drilling with TCT annular cutters. TCT annular cutters have carbide tips, the carbide tips are very strong and actually do not need any lubrication for cutting but, the carbide tips are brazed as tips of annular cutter, this brazing need to remain cool. If the brazing gets hot the chances of carbide tips coming out of brazing are high. For this reason, the operators should use coolants for TCT annular cutters and not lubricants. The use of BDS coolants on any brand of TCT annular cutter can increase the life of cutter to 30 – 50%.

in stock
1,775.00  1,686.00  + 18% GST Add to cart
Sale

PowerCLEANER Chips Removing & Cleaning Tool

Chips Removing & Cleaning Tool

No Reviews

PowerCLEANER is a new innovative Chips Removing & Cleaning Tool from BDS. It has a hook which helps the operator remove the revolved metal chips around annular cutters to drill bits, then the special brush is used to move or clean the chips from the workplace and collect in a dustbin. When this tool the operator does not anymore requires Allen key/screwdriver to remove chips from annular cutter and does not require a paintbrush for cleaning chips. The metal chips are very hot and can burn the fingers, using powerCLEANER helöps increase the safety of the operator and keep the work area clean.

50in stock
1,688.00  1,500.00  + 18% GST Add to cart
Ejector pin

ZAK 100 Ejector Pin

For 12 to 60 mm diameter cutters of 55 mm length

No Reviews

ZAK 100 Ejector Pin for 12 to 60 mm diameter cutters of 55 mm length

in stock
385.00  + 18% GST Add to cart
ejector pin

ZAK 120 Ejector Pin

For 61 to 150 mm diameter cutters of 55 mm length

No Reviews

ZAK 120 Ejector Pin for 61 to 150 mm diameter cutters of 55 mm length cutters.

in stock
1,119.00  + 18% GST Add to cart

Carbide (TCT)
Core Drills Overlong

> 75 mm Cutting depth
> Up to Ø 60 mm: 19 mm Weldon shank (3/4“) and from Ø 61 mm: 32 mm Weldon shank (1 1/4“)

TCT annular cutters
Diameter in mmOrder no.PriceQuantityQtyprice_hsort
5,760.00  + 18% GST
5760
5,760.00  + 18% GST
5760
5,760.00  + 18% GST
5760
5,760.00  + 18% GST
5760
5,760.00  + 18% GST
5760
5,760.00  + 18% GST
5760
5,759.00  + 18% GST
5759
5,759.00  + 18% GST
5759
5,759.00  + 18% GST
5759
6,275.00  + 18% GST
6275
6,275.00  + 18% GST
6275
6,275.00  + 18% GST
6275
6,274.00  + 18% GST
6274
6,274.00  + 18% GST
6274
7,564.00  + 18% GST
7564
7,564.00  + 18% GST
7564
7,564.00  + 18% GST
7564
7,564.00  + 18% GST
7564
7,564.00  + 18% GST
7564
8,719.00  + 18% GST
8719
8,719.00  + 18% GST
8719
8,719.00  + 18% GST
8719
8,719.00  + 18% GST
8719
10,003.00  + 18% GST
10003
10,003.00  + 18% GST
10003
10,003.00  + 18% GST
10003
, 10,003.00  + 18% GST
10003
10,003.00  + 18% GST
10003
12,009.00  + 18% GST
12009
12,009.00  + 18% GST
12009
12,009.00  + 18% GST
12009
12,009.00  + 18% GST
12009
12,009.00  + 18% GST
12009
14,239.00  + 18% GST
14239
14,239.00  + 18% GST
14239
14,239.00  + 18% GST
14239
14,239.00  + 18% GST
14239
14,239.00  + 18% GST
14239
15,566.00  + 18% GST
15566
15,566.00  + 18% GST
15566
15,566.00  + 18% GST
15566
15,566.00  + 18% GST
15566
15,566.00  + 18% GST
15566
17,704.00  + 18% GST
17704
20,650.00  + 18% GST
20650
22,415.00  + 18% GST
22415
24,669.00  + 18% GST
24669
29,767.00  + 18% GST
29767
37,736.00  + 18% GST
37736
43,236.00  + 18% GST
43236
48,736.00  + 18% GST
48736
8,719.00  + 18% GST
8719
Sale annular cutter coolant

Coolant – 1 Liter (Water Soluble 1:9)

For TCT Annular Cutters

No Reviews

The BDS Coolant should be used in 1:10 proportion. So 1 liter of the bottle makes 10 liters of coolant. It is very important to use Coolant while drilling with TCT annular cutters. TCT annular cutters have carbide tips, the carbide tips are very strong and actually do not need any lubrication for cutting but, the carbide tips are brazed as tips of annular cutter, this brazing need to remain cool. If the brazing gets hot the chances of carbide tips coming out of brazing are high. For this reason, the operators should use coolants for TCT annular cutters and not lubricants. The use of BDS coolants on any brand of TCT annular cutter can increase the life of cutter to 30 – 50%.

in stock
1,775.00  1,686.00  + 18% GST Add to cart
Sale

PowerCLEANER Chips Removing & Cleaning Tool

Chips Removing & Cleaning Tool

No Reviews

PowerCLEANER is a new innovative Chips Removing & Cleaning Tool from BDS. It has a hook which helps the operator remove the revolved metal chips around annular cutters to drill bits, then the special brush is used to move or clean the chips from the workplace and collect in a dustbin. When this tool the operator does not anymore requires Allen key/screwdriver to remove chips from annular cutter and does not require a paintbrush for cleaning chips. The metal chips are very hot and can burn the fingers, using powerCLEANER helöps increase the safety of the operator and keep the work area clean.

50in stock
1,688.00  1,500.00  + 18% GST Add to cart
ejector pin

ZAK 245 Ejector Pin

For 61 to 150 mm diameter cutters of 75 mm length

No Reviews

ZAK 245 Ejector Pin for 61 to 150 mm diameter cutters of 75 mm length cutters.

in stock
1,559.00  + 18% GST Add to cart

Carbide (TCT)
Core Drills Extralong

> 110 mm Cutting depth
> Up to Ø 60 mm: 19 mm Weldon shank (3/4“) and from Ø 61 mm: 32 mm Weldon shank (1 1/4“)

TCT Standard - core drills
Diameter in mmOrder no.PriceQuantityQtyprice_hsort
7,785.00  + 18% GST
7785
7,785.00  + 18% GST
7785
7,785.00  + 18% GST
7785
7,785.00  + 18% GST
7785
7,785.00  + 18% GST
7785
7,785.00  + 18% GST
7785
8,693.00  + 18% GST
8693
8,693.00  + 18% GST
8693
8,693.00  + 18% GST
8693
8,693.00  + 18% GST
8693
10,057.00  + 18% GST
10057
10,057.00  + 18% GST
10057
10,057.00  + 18% GST
10057
10,057.00  + 18% GST
10057
10,057.00  + 18% GST
10057
11,631.00  + 18% GST
11631
11,631.00  + 18% GST
11631
11,631.00  + 18% GST
11631
11,631.00  + 18% GST
11631
11,631.00  + 18% GST
11631
13,248.00  + 18% GST
13248
13,248.00  + 18% GST
13248
13,248.00  + 18% GST
13248
13,248.00  + 18% GST
13248
13,248.00  + 18% GST
13248
15,742.00  + 18% GST
15742
15,742.00  + 18% GST
15742
15,742.00  + 18% GST
15742
15,742.00  + 18% GST
15742
15,742.00  + 18% GST
15742
18,242.00  + 18% GST
18242
18,242.00  + 18% GST
18242
18,242.00  + 18% GST
18242
18,242.00  + 18% GST
18242
20,742.00  + 18% GST
20742
20,742.00  + 18% GST
20742
20,742.00  + 18% GST
20742
20,742.00  + 18% GST
20742
22,242.00  + 18% GST
22242
22,242.00  + 18% GST
22242
22,744.00  + 18% GST
22744
26,312.00  + 18% GST
26312
28,534.00  + 18% GST
28534
31,449.00  + 18% GST
31449
39,468.00  + 18% GST
39468
47,519.00  + 18% GST
47519
65,847.00  + 18% GST
65847
68,891.00  + 18% GST
68891
Sale annular cutter coolant

Coolant – 1 Liter (Water Soluble 1:9)

For TCT Annular Cutters

No Reviews

The BDS Coolant should be used in 1:10 proportion. So 1 liter of the bottle makes 10 liters of coolant. It is very important to use Coolant while drilling with TCT annular cutters. TCT annular cutters have carbide tips, the carbide tips are very strong and actually do not need any lubrication for cutting but, the carbide tips are brazed as tips of annular cutter, this brazing need to remain cool. If the brazing gets hot the chances of carbide tips coming out of brazing are high. For this reason, the operators should use coolants for TCT annular cutters and not lubricants. The use of BDS coolants on any brand of TCT annular cutter can increase the life of cutter to 30 – 50%.

in stock
1,775.00  1,686.00  + 18% GST Add to cart
Sale

PowerCLEANER Chips Removing & Cleaning Tool

Chips Removing & Cleaning Tool

No Reviews

PowerCLEANER is a new innovative Chips Removing & Cleaning Tool from BDS. It has a hook which helps the operator remove the revolved metal chips around annular cutters to drill bits, then the special brush is used to move or clean the chips from the workplace and collect in a dustbin. When this tool the operator does not anymore requires Allen key/screwdriver to remove chips from annular cutter and does not require a paintbrush for cleaning chips. The metal chips are very hot and can burn the fingers, using powerCLEANER helöps increase the safety of the operator and keep the work area clean.

50in stock
1,688.00  1,500.00  + 18% GST Add to cart
Ejector pin

ZAK 275 Ejector Pin

For 12 to 60 mm diameter cutters of 110 mm length

No Reviews

ZAK 275 Ejector Pin for 12 to 60 mm diameter cutters of 110 mm length

in stock
1,780.00  + 18% GST Add to cart
Copyright 2018 BDS Machines Pvt. Ltd.. All rights reserved.
Your Shopping Cart
Subtotal: 0.00   (0 items)
Your shopping cart is empty
Start Shopping!
Web Analytics