Description

Non Ferrous Material Drilling Clamp – Magnetic core drilling machines from BDS can in their entirety also be used for the processing of non-ferrous metals and stainless steel. For that purpose, BDS offers clamping devices, which are provided with a pump with circular oil lubrication to build up a vacuum to ensure a safe connection between the magnetic core drilling machine and the workpiece.

Processing of non-ferrous metals and stainless steel. For that purpose, BDS offers clamping devices, which are provided with a pump with circular oil lubrication to build up a vacuum to ensure a safe connection between the magnetic core drilling machine and the workpiece.

Vacuum Plate for non-ferrous Cannel and Gusset Plates- ZAV 300.

Order Number: ZAV 300
Application: Suitable for channeled and gusset plates
Design: High-performance vacuum pump Non Ferrous Material Drilling Clamp with circular oil lubrication. Specially designed for drilling operation on non-ferrous material along with magnetic core drilling machines. The size of the clamping plate is 300 mm diameter.

The magnet clamping force is dependent on the condition of the substrate. The clamping force is significantly reduced by paint, zinc and scale coatings and rust. The substrate must satisfy the following preconditions in order that a sufficient magnet clamping force can be achieved:

• The substrate must be magnetic.

• The clamping surface and the magnetic foot must be clean and grease-free.

• The clamping surface must be completely smooth and level.
NOTE. Clean the substrate and the magnetic foot of the machine before use. Remove any unevenness and loose rust from the substrate. BDS offers special holding devices in its range of accessories. The best clamping effect is obtained on low-carbon steel substrate with a thickness of at least 20 mm.

The best clamping effect is obtained on low-carbon steel substrate with a thickness of at least 20 mm.