AutoMAB 450 Automatic Magnetic Drill with Morse Taper 2

Ø 45 X 55 mm Automatic Drilling

Make: Made in Germany

Maximum Core Drilling: ø 45 mm

Maximum Cutting Depth: 55 mm

Morse Taper: MT2

For more information please click on ALL SPECIFICATIONS.

 153,200  114,900 + GST
SKU: AutoMAB 450


AutoMAB 450_English from BDS Maschinen GmbH – Germany on Vimeo.

The brand new lightweight, powerful, economic and automatic magnetic drilling machine with Morse Taper 2 From BDS Maschinen. Introducing the AutoMAB 450, the automatic magnetic drilling machine with Auto feed as well as an Auto reverse from the Profi special category.
The newly developed automatic magnetic drilling machine AutoMAB 450 weighs just 15 Kgs. After positioning the automatic magnetic drilling machine, switch ON the motor…. and push back the feed handles to set the automatic magnetic drilling machine on Automatic feed.

The AutoMAB 450 automatic magnetic drilling machine can drill up to 45 mm diameter and up to 55 mm cutting depth with Annular cutters. The AutoMAB 450 automatic magnetic drilling machine is equipped with brilliant Load indicators which stop the machine if the load is high, thus avoiding cutter breakage and any accidents.

Once the hole is drilled, the intelligent sensor of the machine knows it and then changes the feed to automatic reverse. An automatic magnetic drilling machine is the best option for, drilling multiple holes at the same time.
As the machine is independent of operator errors while drilling, you can achieve more holes per cutter, hence saving tool cost and time. The AutoMAB 450 automatic magnetic drilling machine is Equipped with made in Germany one thousand fifty watts powerful motor.

  • Next-generation LED switches.
  • Intelligent magnet indicator.
  • Load Indicator for safety.
  • Morse Taper 2.
  • Permanent internal lubrication.
  • Integrated cooling tank.
  • Automatic as well as manual drilling.
  • Delivering, four hundred and fifty RPM speed.
  • 2 Speed Gearbox.
  • Made in Germany by BDS Maschinen.

Additional information



Core Drilling

45 mm

Twist Drilling

18 mm

Motor Output

1150 watts


160 mm

Magnet Size

84 x 168 x 48 mm

Magnet Power

10400 N


16 Kg.

Morse Taper


Speed Gears


Speed 1

250 min-1

Speed 2

450 min-1


Automatic feed, Automatic reverse, Feed handles for manual, Lightweight, Load indicator, Magnet indicator, Morse Taper 2, Two speed gearbox


1 Attached cooling tank, 1 industrail arbor, 1 offset screwdriver, 1 Operating manual, 1 Safety chain, 1 Transport case, 2 ejector pins

Cutting Depth

55 mm


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related products