Only For HSS Annular Cutters: The BDS Cutting oil should be used in pure form without mixing water. While using an HSS annular cutter is very important to use cutting oil for longer life of the annular cutter. Many operators use normal lubricant while drilling with annular cutters but, this normal lubricant has no effect.
The cutting paste is a very useful lubricating agent while tapping as well as for drilling. This cutting paste helps the taps to remain cool as well as provided lubrication, thus it results in longer life of taps. This cutting paste can also be ideally used for drilling with HSS as well as TCT cutters especially for overhead drilling and horizontal drilling where the liquid lubricant can go inside the motor of magnetic drilling machines and cause a short circuit. We recommend you to use BDS Cutting Paste; one can last for several months as very little quantity is required per hole.
The BDS Cutting oil should be used in pure form without mixing water. While using a HSS annular cutter ist very important to use cutting oil for longer life of the annular cutter. Many operators use normal lubricant while drilling with annular cutters but, this normal lubrcant has no effect on annular ch cutter. The.
The BDS Coolant should be used in 1:10 proportion. So 1 liter of the bottle makes 10 liters of coolant. It is very important to use Coolant while drilling with TCT annular cutters. TCT annular cutters have carbide tips, the carbide tips are very strong and actually do not need any lubrication for cutting but, the carbide tips are brazed as tips of annular cutter, this brazing need to remain cool. If the brazing gets hot the chances of carbide tips coming out of brazing are high. For this reason, the operators should use coolants for TCT annular cutters and not lubricants. The use of BDS coolants on any brand of TCT annular cutter can increase the life of cutter to 30 – 50%.